This can be used for solid removal when proceeding the waste oil
separation or olive oil initial separation. Special in the mining
and mineral industry, and other area need dry stackable solid.
Also for drilling and construction fluid, environmental protection
sewage, oily sludge, cutting fluid, sand washing water, mineral
washing water, soda white mud, salt mud de-watering, magnesium
aluminum emulsion, steel-making wastewater, precision casting
wastewater, industrial wastewater, water plant sludge, lake sludge,
kaolin grading, calcium carbonate, bentonite, Silica, titanium
dioxide, calcium sulfate, barium sulfate, conductive film glass
polishing solution, cryolite, silicate, oil sand separation,
landing oil, etc.
Product Introduction
The LW520 centrifuge is a new model launched by our factory based
on years of research and manufacture of centrifuges, according to
the characteristics of domestic production processes. The new model
with international advanced level has been developed based on the
characteristics of solid and liquid two-phase separation in
monosodium glutamate, alcohol, non-metallic ore and similar
production processes.
This manual describes the characteristics, structural principle,
installation and commissioning, operation and maintenance, machine
lubrication, maintenance, failure analysis and analysis of LW520
centrifuge Exclusions, electrical systems, wearing parts, etc. will
be explained, and the user unit is expected to read this manual
carefully for reference of installation and use. The names and
numbers of each component in this manual are compiled and named
according to our relevant standards.
Therefore, part of the structure of a certain type of product may
not conform to the instructions. We will try our best to give a
timely explanation, and please ask our customers to inquire at any
time. LW520 centrifuge design, manufacturing, factory inspection,
etc. are strictly implemented JB/T502-2004 and enterprise technical
specifications formulated by our factory.
Applications
The 3-phase decanter separates which contains oil into an oil
phase, solids and virtually oilfree waste water. Because of its
high dry matter, the solids can be recycled relatively easily. In
addition, the solids concentration in the waste water is lower than
would be the case if nozzle separators are used in conventional
process.
Advantages :
. 1. Lower cake transportation costs due to very dry solids
2. Better recovery of nutrients due to very high separation
efficiency
3. Lower fresh water consumption compared to other processes
4. Continuous and fully automatic operation
5. 24 h operating reliability
6. Optimum wear protection
7. Energy saving design
8. Easy to operate
9. Easy to maintain
10. Simple assembly/dismantling
Working principle
Features
- Adjustable bowl speed via VFD
|
- Highest g-force for higher solids output
|
- Approximately 80 to 90 % of the oil is recovered.
|
- Belts for both primary motor and secondary motor
|
- Automatic adjustment of differential speed via VFD
|
- Low personnel costs due to continuous and automatic operation.
|
- 3-phase AC motor for controlled torque starting via frequency
converter
|
- All parts coming into contact with the product are made of
stainless steel.
|
